DESAIN OF DIGITAL AS AN RFID-BASED LABORATORY ASSISTANT’ ATTENDANCE INFORMATION BOARD

  • Rizqina Rihadatul 'Aisy Universitas Budi Luhur
  • Nifty Fath
  • Eka Purwa Laksana

Abstract

The laboratory has information that must be updated frequently to provide students with information regarding the presence of laboratory assistants. Therefore, in this study, digital signage will be used as an information medium that can display laboratory assistant presence data in real-time. Through digital signage, laboratory assistant presence information can be displayed digitally and accurately. The initial step of the program is to initiate the database. After the E-KTP is attached to the RFID, the database will check whether the identity on the card is recognized or not. If the card is registered on the attendance form, it will be displayed on digital signage. Based on the test results, the use of digital signage as an information board based on RFID as a method of identifying the presence of laboratory assistants has given good results. This system can display real-time and accurate attendance information through digital signage. In addition to testing the duration of the RFID reading when exposed to obstacles in the form of plywood and acrylic and when not exposed to obstacles, it shows variations in reading duration depending on the surrounding environment of the RFID reader. Furthermore, Quality of Service (QoS) testing was carried out, which showed very good results according to TIPHON standards. The test results show the lowest delay in the morning using a tethering network with a value of 11 ms and the highest throughput in the morning using a tethering network with a value of 736.649 bits/s. Packet loss and jitter are 0 each time.

References

[1] T. Novianti, “Rancang Bangun Pintu Otomatis dengan Menggunakan RFID,” J. Tek. Elektro dan Komput. TRIAC, vol. 6, no. 1, pp. 1–6, 2019, doi: 10.21107/triac.v6i1.4878.
[2] I. U. V. Simanjuntak, A. Y. Basuki, and M. Ridlon, “Rancang Bangun Sistem Pengamanan Pintu Rumah Tinggal Menggunakan E-Ktp Dan
Magnetic Door Lock Berbasis Atmega328,” J. Ilm. Teknol. dan Rekayasa, vol. 25, no. 2, pp. 149–160, 2020, doi: 10.35760/tr.2020.v25i2.2822.
[3] F. Y. Alamsyah, F. Baskoro, R. H. P. A. T., and L. Rakhmawati, “Rancang Bangun Sistem Informasi Kehadiran Dosen dan Asisten Laboratorium Berbasis Internet of Things ( IoT ) Menggunakan RFID dan Aplikasi Telegram Fiqih Yerdian Alamsyah S1 Teknik Elektro , Fakultas Teknik , Universitas Negeri Surabaya Farid Baskoro , Rr,” J. Tek. Elektro, vol. 11, pp. 99–107, 2022.
[4] Nurdiansyah, “Sistem Absensi Menggunakan Rfid Dan Esp32 Cam Berbasis Iot Pada Smk Ma’Arif Nu Talang,” Politek. Harapan Bersama Tegal, pp. 1–14, 2018.
[5] K. Agus, P. Mulia, and A. Triayudi, “Sistem Absensi Smart Doorlock Pada Ruangan Dengan Menggunakan SQL Server Berplatform Android,” J. Inform. Electr. Eng., vol. 3, no. 1, pp. 30–35, 2021.
[6] A. Triyono and F. Metandi, “Rancang Bangun Sistem Presensi Dosen dan Mahasiswa Dengan Radio Frequency Identification (RFID) Berbasis
Raspberry PI,” Just TI (Jurnal Sains Terap. Teknol. Informasi), vol. 13, no. 2, p. 103, 2021, doi: 10.46964/justti.v13i2.622.
[7] D. Kurniadi et al., “Sistem Informasi Presensi Mahasiswa Berbasis RFID Menggunakan Metode Rapid Application Development,” J.
Teknol. Inf., vol. 17, no. 1, pp. 1–10, 2020.
[8] H. Okada, S. Sato, T. Wada, K. Kobayashi, and M. Katayama, “Preventing Degradation of the Quality of Visual Information in Digital Signage and Image-Sensor-Based Visible Light Communication Systems,” IEEE Photonics J., vol. 10, no. 3, pp. 1–9, 2018, doi: 10.1109/JPHOT.2018.2829146.
[9] K. P. Aji, U. Darusalam, and N. D. Nathasia, “Perancangan Sistem Presensi Untuk Pegawai Dengan RFID Berbasis IoT Menggunakan NodeMCU ESP8266,” JOINTECS (Journal Inf. Technol. Comput. Sci., vol. 5, no. 1, p. 25, 2020, doi: 10.31328/jointecs.v5i1.1222.
[10] A. N. Santoso, S. Rostianingsih, and J. Andjarwirawan, “Implementasi Digital Signage Menggunakan Raspberry Pi,” J. Infra Petra, no. 031, pp. 0–3, 2019.
[11] W. Krisna, H. J. Muhammad, and D. Puspitaningrum, “Penggunaan Digital Signature Untuk Absensi Pada Universitas Muhammadiyah Purworejo,” J. Sist. Cerdas, vol. 5, no. 1, pp. 36–45, 2022, doi: 10.37396/jsc.v5i1.188.
[12] S. Ndoru et al., “RANCANG BANGUN SISTEM INFORMASI ABSENSI MENGGUNAKAN WEBCAM DAN DETEKSI LOKASI BERBASIS WEB (STUDI KASUS:FAKULTAS TEKNOLOGI INFORMASI),” J. Sist. Inf. DAN Tek. Komput., vol. 8, no. 1, pp. 200–205, 2023.
[13] H. Landaluce, L. Arjona, A. Perallos, F. Falcone, I. Angulo, and F. Muralter, “A review of iot sensing applications and challenges using RFID and wireless sensor networks,” Sensors (Switzerland), vol. 20, no. 9, 2020, doi: 10.3390/s20092495.
[14] X. Zhang et al., “A Digital Signage Audience Classification Model Based on the Huff Model and Backpropagation Neural Network,” IEEE Access, vol. 8, pp. 71708–71720, 2020, doi: 10.1109/ACCESS.2020.2987717.
[15] Y. Trimarsiah and M. Arafat, “Analisis dan Perancangan Website sebagai Sarana Informasi pada Lembaga Bahasa Kewirausahaan dan Komputer Akmi Baturaja,” J. Ilm. MATRIK, vol. 19, no. 1, pp. 1–10, 2017
Published
2023-10-19
How to Cite
'AISY, Rizqina Rihadatul; FATH, Nifty; LAKSANA, Eka Purwa. DESAIN OF DIGITAL AS AN RFID-BASED LABORATORY ASSISTANT’ ATTENDANCE INFORMATION BOARD. MAESTRO, [S.l.], v. 6, n. No 2, p. 386-393, oct. 2023. ISSN 2655-3430. Available at: <https://jom.ft.budiluhur.ac.id/index.php/maestro/article/view/608>. Date accessed: 27 july 2024.
Section
Prodi Teknik Elektro