DESIGN AND CONSTRUCTION OF DIGITAL SCALES WITH BODY MASS INDEX CLASSIFICATION FACILITY USING FUZZY LOGIC ALGORITHM

  • Alfian Nurroqim Universitas Budi Luhur
  • Akhmad Musafa

Abstract

In general, there is already a way to calculate the value of Body Mass Index (BMI). But the determination in this way is very rigid, because if there is a small difference in value it can result in differences in BMI status. Using fuzzy logic can give tolerance to the BMI value, so that if there is a small change it will not cause a significant difference in BMI status. In this final project, a digital scale is designed which is equipped with facilities for determining BMI using the Mamdani fuzzy logic algorithm based on the results of measurements of height and weight. Measurement of height using an ultrasonic sensor while measurement of weight using a load cell sensor. The input height and weight from sensor readings will be fuzzified into linguistic variables using a membership function, and fuzzy output in the form of BMI values ​​which are fuzzified into firm values ​​using linguistic variables from the input membership function. The implication function is performed using the MIN function and the rule composition using the MAX function. The fuzzy BMI is defuzzified using the center of gravity method. System testing was carried out using 7 data samples with a height of 50 cm to 200 cm and a weight of 10 kg to 120 kg. In this system, the BMI value is not only displayed on the LCD but also in the form of sound using speakers. The test results show that there are differences with the results of BMI calculations using firm logic as a reference, overall there is an average error of BMI results using firm logic with fuzzy logic of 19.35%.

References

[1] Ritaningsih, S. P. (2020) ‘Hubungan Faktor Genetik Dan Asupan Natrium Dengan Risiko Kejadian Hipertensi Pada Masyarakat Di Pukesmas Sukorejo Kabupaten Jember’.

[2] Kementerian Kesehatan RI (2018) ‘Epidemi Obesitas’, Jurnal Kesehatan, pp. 1–8. Available at: http://www.p2ptm.kemkes.go.id/dokumen-ptm/factsheet-obesitas-kit-informasi-obesitas.

[3] Supriyono, I. A., Sudarto, F. and Fakhri, M. K. (2016) ‘Pengukur Tinggi Badan Menggunakan Sensor Ultrasonik Berbasis Mikrokontroler Atmega328 Dengan Output Suara’, CCIT Journal, 9(2), pp. 148–156. doi: 10.33050/ccit.v9i2.

[4] Mandayatma, E. (2018) ‘Peningkatan Resolusi Sensor Load Cell Pada Timbangan Elektronik’, Jurnal Eltek, 16(1), p. 37. doi: 10.33795/eltek.v16i1.85.

[5] Puspasari, F.- et al. (2019) ‘Sensor Ultrasonik HCSR04 Berbasis Arduino Due Untuk Sistem Monitoring Ketinggian’, Jurnal Fisika dan Aplikasinya, 15(2), p. 36. doi: 10.12962/j24604682.v15i2.4393.

[6] Rahakbauw, D. L., Rianekuay, F. J. and Lesnussa, Y. A. (2019) ‘Penerapan Metode Fuzzy Mamdani Untuk Memprediksi Jumlah Produksi Karet (Studi Kasus: Data Persediaan Dan Permintaan Produksi Karet Pada Ptp Nusantara Xiv (Persero) Kebun Awaya, Teluk Elpaputih, Maluku-Indonesia)’, Jurnal Ilmiah Matematika Dan Terapan, 16(1), pp. 51–59. doi: 10.22487/2540766x.2019.v16.i1.12764
Published
2021-10-31
How to Cite
NURROQIM, Alfian; MUSAFA, Akhmad. DESIGN AND CONSTRUCTION OF DIGITAL SCALES WITH BODY MASS INDEX CLASSIFICATION FACILITY USING FUZZY LOGIC ALGORITHM. MAESTRO, [S.l.], v. 4, n. 2, p. 231 - 239, oct. 2021. ISSN 2655-3430. Available at: <https://jom.ft.budiluhur.ac.id/index.php/maestro/article/view/514>. Date accessed: 29 mar. 2024.
Section
Prodi Teknik Elektro